Creator Electronics CR-M4102 Especificações descarregar pdf (Página 41)

100

101

4 - 3

4.2.1 Basic system setting

The basic system setting contents are shown below.

Default

No. Item Setting range

Initial

value

Units

Remarks

Operation cycle

setting

0: 0.8ms

1: 1.7ms

2: 3.5ms

3: 7.1ms

4: 14.2ms

5: Automatic setting

5 ms

• Set the motion operation cycle.

Operation

setting for

STOP → RUN

0: Turns on M2000 when the switch is changed from STOP to

RUN.

1: Turns on M2000 when the switch is changed from STOP to

RUN and the setting register (D704) is set to "1".

0 –

• Set such condition as to turn on

the PLC READY flag (M2000).

Emergency

stop input

setting

0: No setting

1: X (PX) (0 to 1FFF)

2: M (0 to 1FFF)

0 –

• Set the bit device for

emergency stop.

• Bit device OFF → While

emergency stop input is ON

• Bit device ON → While

emergency stop input is OFF

Latch range

setting

Sets the range (latch (1)) that can be cleared using latch clear

key and the range (latch (2)) that cannot be cleared using latch

clear key.

– –

• Set the latch range for devices

(M, B, F, D, W) respectively.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 359 360

Comentários a estes Manuais

Sem comentários

Creator Electronics CR-M4102 Especificações Página 41

Comentários a estes Manuais