Creator Electronics Digital Conference System Manual do Utilizador Página 3
- Página / 62
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
Important Notices
warning
In order to ensure the reliable performance of the
equipment and the safety of the user, please observe
the following matters during the process of
installation, use and maintenance:
The matters needing attention of installation
◆Please do not use this product in the following
places: the place of dust, soot and electric
conductivity dust, corrosive gas, combustible gas; the
place exposed to high temperature, condensation,
wind and rain; the occasion of vibration and impact .
Electric shock, fire, wrong operation can lead to
damage and deterioration to the product, either;
◆in processing the screw holes and wiring, make
sure that metal scraps and wire head will not fall into
the shaft of controller, as it could cause a fire, fault,
or incorrect operation;
◆when the installation work is over, it should be
assured there is nothing on the ventilated face,
including packaging items like dust paper. Otherwise
this may cause a fire, fault, incorrect operation for the
cooling is not free,;
◆Should avoid wiring and inserting cable plug in
charged state, otherwise it is easy to cause the shock,
or electrical damage;
◆The installation and wiring should be strong and
reliable, contact undesirable may lead to false action;
◆For a serious interference in applications, should
choose shield cable as the high frequency signal input
or output cable, so as to improve the anti-jamming
ability of the system.
Attention in the wiring
◆ Only after cutting down all external power source,
can install, wiring operation begin, or it may cause
electric shock or equipment damage;
◆This product grounds by the grounding wires .To
avoid electric shocks, grounding wires and the earth
must be linked together. Before the connection of
input or output terminal, please make sure this
product is correctly grounded;
◆ Immediately remove all other things after the
wiring installation. Please cover the terminals of the
products cover before electrification so as to avoid
cause electric shock;
Matters needing attention during operation and
maintenance
◆ Please do not touch terminals in a current state,
or it may cause a shock, incorrect operation;
◆ Please do cleaning and terminal tighten work
after turning off the power supply. These operations
can lead to electric shock in a current state;
◆ Please do the connection or dismantle work of
the communication signal cable , the expansion
module cable or control unit cable after turning off
the power supply, or it may cause damage to the
equipment, incorrect operation;
◆ Please do not dismantle the equipment, avoid
damaging the internal electrical component;
◆ Should be sure to read the manual, fully confirm
the safety, only after that can do program changes,
commissioning, start and stop operation;
Matters needing attention in discarding product
◆ electrolytic explosion: the burning of electrolytic
capacitor on circuit boards may lead to explosion;；
◆ please collect and process according to the
classification, do not put into life garbage；
◆please process it as industrial waste, or according
to the local environmental protection regulations.
- CREATOR CORPORATION（CHINA） 1
- Chapter 1 Summary 8
- 2.1 DIG5201 9
- 2.1.3 panel description 10
- Description of COM port 12
- System Information 15
- Volume Settings 16
- Unit Management 16
- 's function of 18
- Operating examples of 19
- Panel buttons 19
- 2.2 Dual Backup host of 21
- 2.2.2 panel description 22
- Chapter 3 Conference system 26
- 3.3 Descriptions of panel 27
- 3.4 Operator 27
- 3.5 technical parameters 28
- 4.1 Product classification 30
- speech 32
- 4.2.2 panel description 33
- 4.3 CR-DIG5202/4B2 speech 34
- 4.3.2 panel description 35
- 4.4 CR-DIG5202/4E2 speech 37
- 4.5 CR-DIG5202/4D2 Speech 38
- 4.5.2 panel description 39
- 4.6 Embedded unit 40
- 4.6.4 panel description 43
- 4.7 Examples of speech unit 44
- 4.7.1 Launch sign in 45
- sign in 45
- 4.7.2 Launch vote 45
- Chairman initiate vote 46
- 4.7.4 Services 47
- 4.8 VFD display unit 49
- 4.9 VFD isplay unit 50
- 5.1 system connection box 55
- 5.1.2 panel description 56
- 5.1.4 connection diagram 57
- 5.2.1 features 57
- Chapter 6 Accessories 59
- Function description 60
Brother Adapter für die Scannertransparenz Benutzerhandbücher
Die Liste der Brother Adapter für die Scannertransparenz -Produkte enthält 9 Benutzerhandbücher für 8 diese Modelle. Alle PDF-Benutzerhandbücher können heruntergeladen oder online angezeigt werden.
Comentários a estes Manuais